Cisco Cisco Packet Data Gateway (PDG)

authenticate rau

Enables or disables and fine tunes authentication procedures for routing area updates (RAUs)

Product

SGSN

Privilege

Security Administrator, Administrator

Command Modes

Exec > Global Configuration > Call Control Profile Configuration

configure > call-control-profile profile_name

Entering the above command sequence results in the following prompt:

[local]

host_name

(config-call-control-profile-

profile_name

Syntax Description

authenticate rau [ access-type { gprs | umts } | frequency frequency [ access { gprs | umts } ] | periodicity

duration [ access { gprs | umts } ] | update-type { combined-update | imsi-combined-update | periodic |

ra-update } [ access-type { gprs | umts } | frequency frequency | periodicity duration | with { foreign-ptmsi

| inter-rat-local-ptmsi | local-ptmsi } [ access-type { gprs | umts } | frequency frequency | periodicity

duration ]
no authenticate rau [ access-type { grps | umts } | update-type { combined-update | imsi-combined-update

| periodic | ra-update } [ access-type { gprs | umts } | with { foreign-ptmsi | inter-rat-local-ptmsi |

local-ptmsi } [ access-type { gprs | umts } ]
remove authenticate rau [ access-type { gprs | umts } | periodicity [ access { gprs | umts } ] | update-type

{ combined-update | imsi-combined-update | periodic | ra-update } [ access-type { gprs | umts } |

periodicity | with { foreign-ptmsi | inter-rat-local-ptmsi | local-ptmsi } [ access-type { gprs | umts } |
periodicity ] ]

Disables authentication for the RAUs specified in the configuration for the call control profile.

remove

Deletes the authentication configuration for the RAUs from the call control profile in the configuration file.

access-type type

One of the following must be selected to identify the type of network access if the access-type keyword is
included in the command:

• gprs

• umts

Command Line Interface Reference, Modes C - D, StarOS Release 19

Call Control Profile Configuration Mode

authenticate rau