Cisco Cisco Packet Data Gateway (PDG)

policy s1-reset

Configures how the MME responds to an S1 interface reset.

Product

MME

Privilege

Administrator

Command Modes

Exec > Global Configuration > Context Configuration > MME Service

configure > context context_name > mme-service service_name

Entering the above command sequence results in the following prompt:

[

context_name

]

host_name

(config-mme-service)#

Syntax Description

policy s1-reset { detach-ue | idle-mode-entry }
default policy s1-reset

default

Returns the command to its default setting of idle-mode-entry.

detach-ue

detach-ue: Specifies that UEs are to be implicitly detached from the service upon S1 interface reset.

idle-mode-entry

idle-mode-entry: Specifies that UEs are to be placed into an idle mode condition during S1 interface reset.

Usage Guidelines

Use this command to configure how the MME reacts to an S1 interface reset condition.

Examples

The following command configures the MME to place UEs into an idle state while the S1 interface is being
reset:
policy s1-reset idle-mode-entry

Command Line Interface Reference, Modes I - Q, StarOS Release 19

976

MME Service Configuration Mode Commands

policy s1-reset