Cisco Cisco Packet Data Gateway (PDG)
area
Configures an Open Shortest Path First Version 3 (OSPFv3) area and enables authentication for that area.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > OSPFv3 Configuration
configure > context context_name > router ospfv3
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-ospfv3)#
Syntax Description
[
no
]
area { decimal_value | ipv4address } default-cost default_integer_value
|
stub
[
no-summary
] |
virtual-link virtuallink_neighbour_Ipv4_address
[
dead-interval virtuallink_dead_interval
] [
hello-interval virtuallink_hello_interval
] [
retransmit-interval virtuallink_retransmit_interval
] [
transmit-delay virtuallink_transmit_delay
]
no
Disables authentication for the specified area.
decimal_value
| ipv4address
decimal_value: Specifies the identification number of the area where authentication will be enabled as an
integer from 0 through 4294967295.
integer from 0 through 4294967295.
ipv4address: Specifies the IP address of the area where authentication will be enabled in IPv4 dotted-decimal
notation.
notation.
default-cost default_integer_value
Sets the OSPFV3 authentication area's default cost as an integer from 1 through 16777215.
stub
[ no-summary ]
Sets the OSPFV3 stub area. Only Router-LSAs, Network-LSAs, Inter-area Prefix-LSAs, Intra-area Prefix-LSAs
and Link-LSAs are allowed in a Stub area.
and Link-LSAs are allowed in a Stub area.
no-summary Does not inject inter-area routes into stub area.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1162
OSPFv3 Configuration Mode Commands
area