Cisco Cisco Packet Data Gateway (PDG)
qci
This command sets the QoS Class Identifier (QCI) for PCC-QoS-Profile which is to use for Subscriber profile
in PCC-Service instance on IPCF node.
in PCC-Service instance on IPCF node.
Product
IPCF
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC QoS Profile
Configuration
Configuration
configure > context context_name > pcc-service service_name > qos-profile profile_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pcc-qos-profile)#
Syntax Description
[
no
]
qci qci_id
no
Removes the configured QCI value set for PCC-QoS-Profile for PCC-Service instance on IPCF node.
qci qci_id
Sets the QoS Class Identifier for a PCC-QoS-Profile which is to use for Subscriber profile in PCC-Service
instance on IPCF node.
instance on IPCF node.
qci_id must be an integer from 1 through 255.
Usage Guidelines
Use this command to set the QoS Class Identifier for PCC-QoS-Profile which is to use for Subscriber profile
in PCC-Service instance on IPCF node.
in PCC-Service instance on IPCF node.
Examples
Following command sets the QCI 101 for PCC-QoS-Profile instance on IPCF node.
qci 101
qci 101
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1416
PCC-QoS-Profile Configuration Mode Commands
qci