Cisco Cisco Packet Data Gateway (PDG)

Página de 1868
retransmission-timeout
Configures the maximum allowable time for the PDSN service to wait for a response from the PCF before it:
Attempts to communicate with the PCF again (if the system is configured to retry the PCF)
OR
Marks the PCF as unreachable.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdsn-service)#
Syntax Description
retransmission-timeout time
[
default
|
no
]
retransmission-timeout
no
Enables/Disables the retransmission-timeout.
default
Sets / Restores default value assigned for retransmission-timeout.
time
Specifies the maximum allowable time for the PDSN service to wait for a response from the PCF before it a)
attempts to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the
PCF as unreachable.
time is measured in seconds and can be configured to any integer value between 1 and 1,000,000.
Usage Guidelines
Use the retransmission timeout command in conjunction with the max-retransmissions command in order
to configure the PDSN services behavior when it does not receive a response from a particular PCF.
Command Line Interface Reference, Modes I - Q, StarOS Release 19    
1605
PDSN Service Configuration Mode Commands
retransmission-timeout