Cisco Cisco Packet Data Gateway (PDG)
simple-ip allow
Enables or disables Simple-IP sessions from making a connection before authorization takes place.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdsn-service)#
Syntax Description
[
no
|
default
]
simple-ip allow
no
When a session attempts PPP authentication, it is assumed that it is a Simple-IP session and it is disconnected
before the user is authenticated (RADIUS or local authentication). Also, if allow-noauth is enabled and PPP
authentication is not performed, after IPCP the session is disconnected if it is discovered that it is a Simple-IP
session.
before the user is authenticated (RADIUS or local authentication). Also, if allow-noauth is enabled and PPP
authentication is not performed, after IPCP the session is disconnected if it is discovered that it is a Simple-IP
session.
default
Reset this command to allow Simple-IP sessions to connect.
Usage Guidelines
Use this command to prevent Simple-IP sessions from connecting to a PDSN service.
Examples
The following command configures the PDSN service so that it will reject any Simple-IP sessions:
no simple-ipallow
The following command configures the PDSN service to allow Simple-IP sessions:
simple-ip allow
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1610
PDSN Service Configuration Mode Commands
simple-ip allow