Cisco Cisco Packet Data Gateway (PDG)
threshold a11-ppp-send-discard
Sets an alarm or alert for the PDSN service based on the number of packets that the PPP protocol processing
layer internally discarded on transmit for any reason.
layer internally discarded on transmit for any reason.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdsn-service)#
Syntax Description
threshold a11-ppp-send-discard high_thresh
[
clear low_thresh
]
no threshold a11-ppp-send-discard
no
Deletes the alert or alarm.
high_thresh
Default: 0
The high threshold number of discarded PPP send packets that must be met or exceeded within the polling
interval to generate an alert or alarm. It can be configured to any integer value between 0 and 100000.
interval to generate an alert or alarm. It can be configured to any integer value between 0 and 100000.
clear low_thresh
Default:0
The low threshold number of discarded PPP send packets that must be met or exceeded within the polling
interval to clear an alert or alarm. It can be configured to any integer value between 0 and 100000.
interval to clear an alert or alarm. It can be configured to any integer value between 0 and 100000.
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm model,
the system assumes it is identical to the high threshold.
the system assumes it is identical to the high threshold.
Important
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1615
PDSN Service Configuration Mode Commands
threshold a11-ppp-send-discard