Cisco Cisco Packet Data Gateway (PDG)
session-delete-delay
Configures a delay in terminating a session.
Product
P-GW
SAEGW
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pgw-service)#
Syntax Description
session-delete-delay timeout [ msec ]
{ default | no } session-delete-delay timeout
{ default | no } session-delete-delay timeout
default
Resets the command to the default setting of 10000 milliseconds.
no
Disables the feature.
timeout msec
Default: 10000
Specifies the time to retain the session (in milliseconds) before terminating it.
msec must be an integer from 1000 to 60000.
Usage Guidelines
Use this command to set a delay to provide session continuity in break-before-make scenarios.
Examples
The following command sets the session delete delay to the default setting of 10,000 milliseconds:
session-delete-delay timeout
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1683
P-GW Service Configuration Mode Commands
session-delete-delay