Cisco Cisco Packet Data Gateway (PDG)
mtp3-msg-priority
Configures the priority for sending MTP3 management messages.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > SS7 Routing Domain Configuration > Linkset Configuration > Link
Configuration
Configuration
configure > ss7-routing-domain domain_id variant var_type > linkset id linkset_id > link id link_id
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-ss7-rd-linkset-linkset_id-link-link_id)#
Syntax Description
mtp3-msg-priority priority
default mtp3-msg-priority
default mtp3-msg-priority
default
Resets the number of priority to the default value.
priority
priority: must be an integer from 0 to 3.
Default: 0
Usage Guidelines
Use this command to set the priority for sending MTP3 management messages.
Examples
Use the following to set the message priority to 3:
mtp3-msg-priority 3
mtp3-msg-priority 3
Command Line Interface Reference, Modes I - Q, StarOS Release 19
425
Link Configuration Mode Commands
mtp3-msg-priority