Cisco Cisco Packet Data Gateway (PDG)
sequence-number-validate
Configures sequence number validation of the received MIPv6 control packets by the LMA service according
to RFC 3775.
to RFC 3775.
Product
P-GW
SAEGW
Privilege
Administrator
Syntax Description
[ default | no ] sequence-number-validate
default
Resets the command value to the default setting of enabled.
no
Disables the feature.
Usage Guidelines
Use this command to configure the sequence number validation of the received MIPv6 control packets (PBUs)
by the LMA service. This feature validates MIPv6 control packets and insures that any incoming packets with
a sequence number prior to the last number received is consider invalid.
by the LMA service. This feature validates MIPv6 control packets and insures that any incoming packets with
a sequence number prior to the last number received is consider invalid.
If this service has no cache entry of the home address included in the PBU, it will accept any sequence value
in the initial PBU from the mobile node.
in the initial PBU from the mobile node.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
469
LMA Service Configuration Mode Commands
sequence-number-validate