Cisco Cisco Packet Data Gateway (PDG)
max-tunnel-challenge-length
Sets the maximum length of the tunnel challenge in bytes. The challenge is used for authentication purposes
during tunnel creation.
during tunnel creation.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > LNS Service Configuration
configure > context context_name > lns-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-lns-service)#
Syntax Description
max-tunnel-challenge-length bytes
bytes
Default: 16
Specifies the number of bytes to set the maximum length of the tunnel challenge as an integer from 4 through
32.
32.
Usage Guidelines
Use this command to set the maximum length, in bytes, for the tunnel challenge that is used during tunnel
creation.
creation.
Examples
The following command sets the maximum length of the tunnel challenge to 32 bytes:
max-tunnel-challenge-length 32
max-tunnel-challenge-length 32
Command Line Interface Reference, Modes I - Q, StarOS Release 19
499
LNS Service Configuration Mode Commands
max-tunnel-challenge-length