Cisco Cisco Packet Data Gateway (PDG)
encapsulation
Configures data encapsulation type to be used for specific MAG service.
Product
HSGW
S-GW
SaMOG
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MAG Service Configuration
configure > context context_name > mag-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mag-service)#
Syntax Description
encapsulation { gre | ipip }
default encapsulation
default encapsulation
default
Resets the encapsulation type to be used by this service to the default option of GRE.
gre
gre: Specifies that GRE encapsulation is to be used for PMIPv6 tunnel data between the MAG and the Local
Mobility Anchor (LMA). This is the default for this command.
Mobility Anchor (LMA). This is the default for this command.
The SaMOG PMIPv6-based S2a interface currently supports GRE encapsulation only.
Important
ipip
ipip: Specifies that IP-in-IP encapsulation is to be used for PMIPv6 tunnel data between the MAG and the
LMA.
LMA.
Usage Guidelines
Use this command to select the encapsulation type to be used for PMIPv6 tunnel data between the MAG and
the LMA.
the LMA.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
731
MAG Service Configuration Mode Commands
encapsulation