Cisco Cisco Packet Data Gateway (PDG)
plmn-id
Configures the carrier's Public Land Mobile Network (PLMN) identifier to associate with this eMBMS service
area.
area.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME-eMBMS Service
configure > context context_name > mme-embms-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-embms-service)#
Syntax Description
plmn-id mcc mcc mnc mnc
mcc mcc
Specifies the mobile country code (MCC) portion of the PLMN identifier. The mcc must be an integer from
100 through 999.
100 through 999.
mnc mnc
Specifies the mobile network code (MCC) portion of the PLMN identifier. The mnc must be a 2- or 3-digit
integer from 00 through 999.
integer from 00 through 999.
Usage Guidelines
Use this command to specify the PLMN identifier to associate with the eMBMS area for this MME's eMBMS
service.
service.
Examples
The following command configures the PLMN identifier with an MCC of 462 and MNC of 02:
plmn id mcc 462 mnc 02
Command Line Interface Reference, Modes I - Q, StarOS Release 19
808
MME-eMBMS Service Configuration Mode Commands
plmn-id