Cisco Cisco Packet Data Gateway (PDG)
use-msc
Associates a Mobile Switching Center (MSC) with the pool area.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service Configuration > Pool Area Configuration
configure > context conext_name > mme-service service_name > pool-area pool_area_name type
round-robin
round-robin
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-pool-area-round-robin)#
Syntax Description
[ no ] use-msc msc_name
no
Removes the associated MSC name from this pool area.
use-mscmsc_name
Associates an MSC name with this pool area.
msc_name is the name of the MSC as configured in the MME Service using the msc command; msc_name
must be an alphanumeric string of 1 to 39 characters.
must be an alphanumeric string of 1 to 39 characters.
Usage Guidelines
This command associates an MSC with this pool area. With a round-robin pool area selection, the MME
selects the next MSC within the pool based on a round-robin scheme.
selects the next MSC within the pool based on a round-robin scheme.
A maximum of 24 MSC associations can be defined within each round-robin pool area.
Examples
The following command associates the MSC named mscsouth1 to this pool.
use-msc mscsouth1
Command Line Interface Reference, Modes I - Q, StarOS Release 19
826
MME MSC Pool Area Configuration Mode
use-msc