Cisco Cisco Packet Data Gateway (PDG)
nri
Configures the network resource identifier (NRI) length used for source SGSN discovery via NRI-FQDN
(Fully Qualified Domain Name) based DNS resolution.
(Fully Qualified Domain Name) based DNS resolution.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-service)#
Syntax Description
[ no ] nri length length plmn-id mcc mcc_value mnc mnc_value
no
Removes a configured NRI length.
length length
Specifies the number of bits to be used in the P-TMSI (bits 23 to 18) to define the NRI as an integer from 1
through 8.
through 8.
plmn-id mcc mcc_value mnc mnc_value
Specifies the PLMN-ID of the SGSN pool.
mcc mcc_value: Specifies the mobile country code (MCC) portion of the PLMN identifier as an integer from
100 through 999.
100 through 999.
mnc mnc_value: Specifies the mobile network code (MNC) portion of the PLMN identifier as a 2- or 3-digit
integer from 00 through 999.
integer from 00 through 999.
Usage Guidelines
Use this command to retrieve the NRI (identity of an SGSN) stored in bits 23 to 18 of the packet-temporary
mobile subscriber identity (P-TMSI). Up to eight NRI length values can be configured.
mobile subscriber identity (P-TMSI). Up to eight NRI length values can be configured.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
947
MME Service Configuration Mode Commands
nri