Cisco Cisco Packet Data Gateway (PDG)
show cs-network
Displays statistics for the Circuit Switched (CS)-network(s) instance configured on a chassis for HNB-GW
service sessions.
service sessions.
Product
HNB-GW
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show cs-network { all | name cs_name } [ status ] [ | { grep grep_options | more }]
all
Displays status counters for all CS (circuit switched) networks configured for HNB-GW service sessions on
a chassis.
a chassis.
name cs_name
Displays status counters for a CS network configured for HNB-GW service specified as an alphanumeric
string of 1 through 127 characters that is case sensitive
string of 1 through 127 characters that is case sensitive
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
Refer to Regulating a Command's Output section of the Command Line Interface Overview chapter for details
on the usage of grep and more.
on the usage of grep and more.
Usage Guidelines
Use this command to display the status of any or all CS-network(s) instance configured on a chassis for
HNB-GW service sessions.
HNB-GW service sessions.
Examples
The following command displays the output for CS network instance status named cs_1_hnb:
show cs-network name cs_1_hnb status
show cs-network name cs_1_hnb status
Command Line Interface Reference, Modes E - F, StarOS Release 19
1017
Exec Mode show Commands (A-C)
show cs-network