Cisco Cisco Packet Data Gateway (PDG)
show ip route-access-list
Displays information related to currently configured route-access-list used to filter routes.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show ip route-access list [ name] [ | { grep grep_options | more ]
name
Specifies the name of an existing route access list as an alphanumeric string of 1 through 79 characters.
| { grep grep_options
| more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Usage Guidelines
Use this command to display information about IP route access lists.
Examples
To display detailed information about an access list named access_route_3, enter the following command:
show ip route-access-list accesss_route_3
show ip route-access-list accesss_route_3
Output descriptions for commands are available in the Statistics and Counters Reference.
Important
Command Line Interface Reference, Modes E - F, StarOS Release 19
1209
Exec Mode show Commands (H-L)
show ip route-access-list