Cisco Cisco Packet Data Gateway (PDG)
show lac-service
Displays the information for all L2TP Access Concentrator (LAC) services or for a particular LAC service.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show lac-service { all | name service_name } [ | { grep grep_options | more } ]
all
Display information for all LAC services.
name service_name
Display information only for an existing LAC service specified as an alphanumeric string of 1 through 63
characters.
characters.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Usage Guidelines
Use this command to list information for LAC services configured on this system.
Examples
The following commands display information for all LAC services and the LAC service named lac1,
respectively.
show lac-service all
show lac-service name lac1
respectively.
show lac-service all
show lac-service name lac1
Command Line Interface Reference, Modes E - F, StarOS Release 19
1244
Exec Mode show Commands (H-L)
show lac-service