Cisco Cisco Packet Data Gateway (PDG)
dns-pgw
Configures context of dns-client.
Product
ePDG
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context > EPDG Service Configuration
configure > context context_name > epdg service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-epdg-service)#
Syntax Description
dns-pgw { context dns_client_context_name | selection { topology [ weight ] | weight } }
{ no | default } dns-pgw { context | selection { topology [ weight ] | weight } }
{ no | default } dns-pgw { context | selection { topology [ weight ] | weight } }
default
Configures context of dns-client to its default value.
no
Disables dns-client's context.
context dns_client_context_name
Specifies the dns-client's context name, which is a string and should be between 1 and 79.
selection
{ topology [ weight ] | weight }
Specifies the pgw dns selection criteria.
topology: Enables topology selection.
topology weight: Enables topology with weight.
weight: Enables selection with weight-only, disables topology selection.
Usage Guidelines
Enable/disable PGW Selection based on topology and load-balancing of PGWs on weight's from DNS.
Use this command to configure the source in which dns-client is configured, dns-pgw selection toplogy/weight
will be used to enable/disable PGW Selection based on topology and load-balancing of PGWs.
will be used to enable/disable PGW Selection based on topology and load-balancing of PGWs.
Command Line Interface Reference, Modes E - F, StarOS Release 19
97
EPDG Service Configuration Mode Commands
dns-pgw