Cisco Cisco Packet Data Gateway (PDG)
show lns-service
Displays the information for all L2TP Network Server (LNS) services or for a particular LNS service.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show lns-service { all | name service_name } [ | { grep grep_options | more } ]
all
Display information for all LNS services.
name service_name
Displays information only for an existing LNS service specified as an alphanumeric string of 1 through 63
characters.
characters.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Usage Guidelines
Use this command to list information for LNS services configured on this system.
Examples
The following commands display information for all LNS services and the LNS service named lns1,
respectively.
show lns-service all
show lns-service name lns1
respectively.
show lns-service all
show lns-service name lns1
Command Line Interface Reference, Modes E - F, StarOS Release 19
1263
Exec Mode show Commands (H-L)
show lns-service