Cisco Cisco Packet Data Gateway (PDG)
pool-share-protocol
Configures the primary or secondary system for the IP pool sharing protocol and enter IPSP configuration
mode.
mode.
Product
PDSN
HA
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > Ethernet Interface Configuration
configure > context context_name > interface interface_name broadcast
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-if-eth)#
Syntax Description
pool-share-protocol { primary ip_address | secondary ip_address } [ mode { active | inactive | check-config
} ]
no pool-share-protocol
no
Deletes the IP pool sharing protocol information from the current interface.
primary address
On the secondary system, defines the IP address of an interface on the primary system that has identical IP
pools configured for use with the IP pool sharing protocol. ip_address must be expressed in IP v4 dotted-decimal
notation.
pools configured for use with the IP pool sharing protocol. ip_address must be expressed in IP v4 dotted-decimal
notation.
secondary ip_address
On the primary system, define the IP address of an interface on the secondary system that has identical IP
pools configured for use with the IP pool sharing protocol. ip_address must be expressed in IP v4 dotted-decimal
notation.
pools configured for use with the IP pool sharing protocol. ip_address must be expressed in IP v4 dotted-decimal
notation.
mode { active | inactive | check-config }
This is an optional command to manage the mode for IP pool sharing protocol for primary or secondary HA.
active: Activates the IP pool sharing protocol mode.
inactive: Inactivates the IP pool sharing protocol mode.
Command Line Interface Reference, Modes E - F, StarOS Release 19
152
Ethernet Interface Configuration Mode Commands
pool-share-protocol