Cisco Cisco Packet Data Gateway (PDG)
debug ip ospf ism
Enables or disables OSPF Interface State Machine (ISM) troubleshooting, based on ISM information type. If
no keywords are specified all ISM information types are enabled. If logging is enabled, results are sent to the
logging system.
no keywords are specified all ISM information types are enabled. If logging is enabled, results are sent to the
logging system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
[ no ] debug ip ospf ism [ events | status | timers ]
no
Disables debugging the specified ISM information. If no keywords are specified, all information is disabled.
events
Enables debugging ISM event information.
status
Enables debugging ISM status information.
timers
Enables debugging ISM timer information.
Usage Guidelines
Use this command to output ISM debug information.
Examples
To enable all ISM debug information, enter the following command;
debug ip ospf ism
debug ip ospf ism
Command Line Interface Reference, Modes E - F, StarOS Release 19
493
Exec Mode Commands (D-S)
debug ip ospf ism