Cisco Cisco Packet Data Gateway (PDG)
debug ipv6 ospf ifsm
Enables or disables OSPFv3 Interface State Machine (ISM) troubleshooting, based on ISM information type.
If no keywords are specified all ISM information types are enabled. If logging is enabled, results are sent to
the logging system.
If no keywords are specified all ISM information types are enabled. If logging is enabled, results are sent to
the logging system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
[ no ] debug ipv6 ospf ism [ events | status | timers ]
no
Disables debugging the specified ISM information. If no keywords are specified, all information is disabled.
events
Enables debugging ISM event information.
status
Enables debugging ISM status information.
timers
Enables debugging ISM timer information.
Usage Guidelines
Use this command to output ISM debug information.
Examples
To enable all ISM debug information, enter the following command;
debug ipv6 ospf ism
debug ipv6 ospf ism
Command Line Interface Reference, Modes E - F, StarOS Release 19
507
Exec Mode Commands (D-S)
debug ipv6 ospf ifsm