Cisco Cisco Packet Data Gateway (PDG)
session trace random
Enable or disables the subscriber session trace functionality based on a the random trace on the network
element. If enabled, the subscriber selection will be based on random logic all instance of session on a specified
UMTS/EPS network element. It also clears/resets the statistics collected for subscriber session trace on a
system.
element. If enabled, the subscriber selection will be based on random logic all instance of session on a specified
UMTS/EPS network element. It also clears/resets the statistics collected for subscriber session trace on a
system.
Product
GGSN
P-GW
Privilege
Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
[no] session trace random random_num network-element {ggsn | pgw} [interface {all | interface]
no
Disables the entire random subscriber session trace or for a specific network element and/or interface.
session trace random random_num}
Configures the number of random subscriber sessions where the session trace is to occur.
random_num is an integer between 1 to 1000 identified the number of subscribers to be selected by random
logic.
logic.
network-element {ggsn | pgw}
Identifies the network element that, in turn, identifies the interfaces where the random session trace is to occur.
Specific interfaces can be specified using the interface keyword described below.
Specific interfaces can be specified using the interface keyword described below.
ggsn: Specifies that the random session trace is to occur on one or all interfaces on the GGSN.
pgw: Specifies that the random session trace is to occur on one or all interfaces on the P-GW.
interface { all | interface }
Specifies the interfaces where the random session trace application will collect data.
all: Specifies all interfaces associated with the selected network element
Command Line Interface Reference, Modes E - F, StarOS Release 19
664
Exec Mode Commands (D-S)
session trace random