Cisco Cisco Packet Data Gateway (PDG)
show alcap counters
Displays the Access Link Control Application Part (ALCAP) protocol message counters related to ALCAP
protocol sessions associated with a Home-NodeB Gateway (HNB-GW) service instance configured and
running on a system.
protocol sessions associated with a Home-NodeB Gateway (HNB-GW) service instance configured and
running on a system.
Product
HNBGW
Privilege
Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show alcap counters [ alcap-service alcap_svc_name [ aal2-node aal2_node_name [ aal2-path aal2_path_id
] ] ] [ | { grep grep_options | more } ]
name alcap_svc_name
Specifies the name of the ALCAP service for which ALCAP protocol session counters are to be displayed.
aal2-node aal2-node
Specifies the name of the ATM Adaptation Layer 2 (AAL2) node for which protocol session counters will
be filtered.
be filtered.
aal2-path aal2_path_id
Specifies the identity number of the AAL2 path on a specific ATM Adaptation Layer 2 (AAL2) node for
which ALCAP protocol counters will be filtered.
which ALCAP protocol counters will be filtered.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section
in Command Line Interface Overview chapter.
in Command Line Interface Overview chapter.
Usage Guidelines
This command is used to display the sessions statistics and counters for ALCAP service.
Command Line Interface Reference, Modes E - F, StarOS Release 19
876
Exec Mode show Commands (A-C)
show alcap counters