Cisco Cisco Packet Data Gateway (PDG)
show asngw-service statistics
Displays statistics for all Access Service Network Gateway (ASN-GW) sessions.
Product
ASN-GW
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show asngw-service statistics [ function-type { auth-relay | context-transfer | data-path | handoff |
im-operations | ms-state-change | paging | qos | capability }] [ name service_name | r4-only | r6-only |
verbose | peer-address ipv4_address
im-operations | ms-state-change | paging | qos | capability }] [ name service_name | r4-only | r6-only |
verbose | peer-address ipv4_address
] [
peer-id id
][
verbose
] [ {
grep grep_options
|
more
} ]
function-type
Displays information about selected function type on R4 or R6 interface.
function-type { auth-relay | context-transfer | data-path | handoff | im-operations | ms-state-change |
paging | qos | capability} [ r4-only | r6-only ]
paging | qos | capability} [ r4-only | r6-only ]
Displays the counters for specific type of functions in an ASN-GW session.
auth-relay: Displays information about authentication relay messages.
context-transfer: Displays information about context-transfer messages.
data-path: Displays information about data-path registration messages.
handoff: Displays information about hand-off messages.
im-operations: Displays information about idle mode state operation messages.
ms-state-change: Displays information about MS state change messages.
paging: Displays information about paging messages.
qos: Displays information about RR messages.
capability: Displays the capability negotiation between the ASNGW and the base station.
r4-only: Displays information about selected function on R4 interface.
r6-only: Displays information about selected function on R6 interface.
Command Line Interface Reference, Modes E - F, StarOS Release 19
900
Exec Mode show Commands (A-C)
show asngw-service statistics