Cisco Cisco ASR 5000
APN Configuration Mode Commands
▀ firewall policy
▄ Command Line Interface Reference, StarOS Release 18
1352
firewall policy
Eenables or disables Stateful Firewall support for the APN.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
firewall policy firewall-required
{ default | no } firewall policy
no
Disables Stateful Firewall support for this APN.
default
Configures the default setting for Stateful Firewall support.
Default: Disabled
Default: Disabled
Usage
Use this command to enable or disable Stateful Firewall support for this APN.
Important:
This command is only available in StarOS 8.0. In StarOS 8.1 and later, this configuration is available
in the ACS Rulebase Configuration Mode.
Important:
Unless Stateful Firewall support for this APN is enabled using this command, firewall processing for
this APN is disabled.
Important:
If firewall is enabled, and the rulebase has no firewall configuration, Stateful Firewall will cause all
packets to be discarded.
Example
The following command enables Stateful Firewall support for an APN:
firewall policy firewall-required