Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
qos ▀
Command Line Interface Reference, StarOS Release 18 ▄
2073
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
prefer-as-cap { both-hss-and-local minimum | local }
This set of options is only available on the SGSN.
Specifies the QoS cap value to use:
Specifies the QoS cap value to use:
both-hss-and-local minimum
Use the lower of either the locally configured QoS bit rate or the
Home Subscriber Server (HSS)-provided QoS bit rate.
local
Use the locally configured QoS bit rate.
Usage
Use this command to configure the QoS parameters for the call control profile for either the MME or the
SGSN.
On an S4-SGSN, this command ensures proper QoS parameter mapping between the S4-SGSN and EPC
UEs, SGWs and PGWs:
SGSN.
On an S4-SGSN, this command ensures proper QoS parameter mapping between the S4-SGSN and EPC
UEs, SGWs and PGWs:
Map EPC ARP parameters to pre-release 8 ARP (Gn/Gp ARP) used during S4-SGSN-to-Gn SGSN call
handovers.
Map ARP parameters received in a GPRS subscription from the HLR to EPC ARP parameters if:
The S4 interface is selected for an EPC capable UE, and
The UE has only a GPRS subscription (but no EPS subscription) in the HLR / HSS.
Example
Configure the Gn/Gp interface ARP priority values:
qos gn-gp arp high-priority 2 medium-priority 3