Cisco Cisco ASR 5000
ACS Charging Action Configuration Mode Commands
flow action ▀
Command Line Interface Reference, StarOS Release 18 ▄
409
#BEARER.ACCT-SESSION-ID#
#BEARER.CORRELATION-ID#
#BEARER.RULEBASE#
#BEARER.SERVED-BSA-ADDR#
#BEARER.SERVICE-NAME#
#BEARER.SUBSCRIBER-ID#
#BEARER.MSISDN#
#HTTP.URL#
#HTTP.URI#
#HTTP.HOST#
#RTSP.URI#
#WSP.URL#
#CONTENT-ID-LABEL#
#CONTENT-ID-LABEL-CAUSING-REDIRECTION#
#BEARER.HWID#
#BEARER.IMSI#
#BEARER.IMEI#
#BEARER.ESN#
#BEARER.MEID#
Concatenated fields separated by ; (semi colon) can also be inserted. For example,
#BEARER.IMSI;BEARER.IMEI#
#BEARER.IMSI;BEARER.IMEI#
encryption { blowfish128 | blowfish64 }
[
| { { aes128 | aes256 } [salt] }
}encrypted ] key key
Important:
This option is available only in StarOS 12.2 and later releases.
encryption
: Specifies to enable encryption for dynamic fields of the redirect URL.
blowfish128
: Specifies to use Blowfish encryption with 128 bit key for encrypting
the dynamic fields.
blowfish64
: Specifies to use Blowfish encryption with 64 bit key for encrypting the
dynamic fields.
aes128
: Specifies to use AES-CBC encryption with 128 bit key for encrypting the
dynamic fields
aes256
: Specifies to use AES-CBC encryption with 256 bit key for encrypting the
dynamic fields.
salt
: Specifies to use salt with AES-CBC encryptions of the dynamic fields.
encrypted
: Specifies to encrypt the key.
key key
: Specifies the key to use for encryption of dynamic fields.
key
must be an alphanumeric string of 1 through 523 characters.