Cisco Cisco ASR 5000
Firewall-and-NAT Policy Configuration Mode Commands
nat check-point-info ▀
Command Line Interface Reference, StarOS Release 18 ▄
5139
Usage
Use this command to enable or disable the checkpointing of basic NAT, standalone H323 and SIP ALG
recovery. ICSR recovery can also be enabled or disabled for basic NAT and SIP flows. The maximum basic
flows that can be checkpointed is also configured. By default, 100 flows can be recovered in a standalone
chassis and ICSR setup.
recovery. ICSR recovery can also be enabled or disabled for basic NAT and SIP flows. The maximum basic
flows that can be checkpointed is also configured. By default, 100 flows can be recovered in a standalone
chassis and ICSR setup.
Example
The following command enables basic NAT recovery and ICSR recovery with flows limited to
10
:
nat check-point info basic limit-flows 10 icsr-also