Cisco Cisco ASR 5000
Subscriber Configuration Mode Commands
prepaid custom ▀
Command Line Interface Reference, StarOS Release 18 ▄
8925
prepaid custom
Enables custom prepaid billing support for a subscriber to be configured by attributes sent from a RADIUS server. If not
enabled, prepaid attributes received from the RADIUS server are ignored. The keywords set prepaid values that are used
if the corresponding RADIUS attribute is not present. If the RADIUS attribute is present, it takes precedence over these
values.
enabled, prepaid attributes received from the RADIUS server are ignored. The keywords set prepaid values that are used
if the corresponding RADIUS attribute is not present. If the RADIUS attribute is present, it takes precedence over these
values.
Product
PDSN
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
prepaid custom { accounting | byte-count compressed | low-watermark percent percentage |
renewal interval seconds } | preference { duration | volume }
renewal interval seconds } | preference { duration | volume }
default prepaid custom { byte-count | low-watermark }
no prepaid custom { accounting | byte-count compressed | low-watermark | renewal }
default
prepaid
custom
{
byte-count
|
low-watermark
}
Resets custom prepaid settings to the default values.
byte-count
: Resets to the default of basing the prepaid byte credits on the flow of uncompressed traffic.
low-watermark
: Disables sending an access request to retrieve more credits when a low watermark is
reached.
no prepaid custom
{
accounting
|
byte-count compressed
|
low-watermark
|
renewal
}
byte-count compressed
: The prepaid byte credits are based on the flow of uncompressed traffic. This is
the default.
low-watermark
: Disables the low watermark feature. An access-request is not sent to the RADIUS server
until the credits granted for the subscriber session are depleted.
renewal
: Disables time-based renewals for prepaid accounting.
accounting
Default: Disabled
Enables custom prepaid accounting behavior.
Enables custom prepaid accounting behavior.
byte-count compressed
Default: uncompressed.