Cisco Cisco Packet Data Gateway (PDG)
APN Profile Configuration Mode
dhcp lease ▀
Command Line Interface Reference, StarOS Release 18 ▄
1505
dhcp lease
Configures a lease period for the UE's IP address during SaMOG Web Authorization pre-authentication and TAL
phases.
phases.
Important:
This command requires the SaMOG Web Authorization feature license. For more information,
contact your Cisco account representative.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
dhcp lease { short duration | time duration }
default dhcp lease { short | time }
remove dhcp lease short
default
Restores the DHCP lease configuration for short lease time (pre-authentication phase) and DHCP lease time
(TAL phae) to its default value.
(TAL phae) to its default value.
remove
If previously configured, removes the DHCP short lease time configuration from this APN profile.
short duration
Specifies the DHCP short lease time for web authorization sessions to force the UE to initiate DHCP request
after the pre-authentication phase completes.
after the pre-authentication phase completes.
duration
must be an integer from 2 through 600.
Default: 20 seconds
time duration
Specifies the lease time for the UE's IP address during the web authorization TAL phase.
duration
must be an integer from 600 through 4294967295.
Default: 4294967295 seconds