Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
▀ peer-msc
▄ Command Line Interface Reference, StarOS Release 18
2060
peer-msc
Enables/disables weight-based selection of a peer MSC during MSC lookup. By default, this functionality is disabled.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
peer-msc interface-type sv weight
remove peer-msc interface-type sv weight
remove
Deletes the weight-based selection for peer-MSC configuration if it has been enabled using this command
and returns to the default of preference-based selection of a peer MSC.
and returns to the default of preference-based selection of a peer MSC.
Usage
This command enables the operator to override the default behavior and define weight-based selection of a
peer-MSC during MSC lookup to facilitate ‘weight’ based load balancing for the MME’s Sv interface.
peer-MSC during MSC lookup to facilitate ‘weight’ based load balancing for the MME’s Sv interface.
Example
Disable weight-based MSC selection when it has been configured:
remove peer-msc interface-type sv weight