Cisco Cisco Packet Data Gateway (PDG)
Crypto Template Configuration Mode Commands
▀ notify-payload
▄ Command Line Interface Reference, StarOS Release 18
3042
notify-payload
This command configures the parameters to be sent in NOTIFY payload.
Product
All products supporting IPSec OCSP
Privilege
Security Administrator
Mode
Exec > Global Configuration > Context Configuration > Crypto Template Configuration
configure > context context_name > crypto template template_name ikev2-dynamic
Entering the above command sequence results in the following prompt:
[context_name]host_name(crf-crypto-tmp1-ikev2-tunnel)#
Syntax
notify-payload error-message-type { network-permanent | network-transient-major |
network-transient-minor | ue } base value
network-transient-minor | ue } base value
default notify-payload error-message-type { network-permanent | network-transient-major |
network-transient-minor | ue } base
network-transient-minor | ue } base
default
Sets / Restores default value assigned for the parameters to be sent in NOTIFY payload.
error-message-type
This command configure the type of notify error message.
network-permanent
Configures the value for permanent network errors. Default is 11000.
network-transient-major
Configure the value for major transient network errors. Default is 10500.
network-transient-minor
Configure the value for minor transient network errors. Default is 10000.
ue
Configure the value for UE related errors. Default is 9000.
base value
Configure the base value for the chosen error category. Only private range supported 8192-16383.
value
integer value between 8192 and 16383.