Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (A-C)
show active-charging firewall statistics ▀
Command Line Interface Reference, StarOS Release 18 ▄
4313
show active-charging firewall statistics
Displays Active Charging Stateful Firewall statistics.
Product
PSF
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show active-charging firewall statistics [ callid call_id | domain-name domain_name |
nat-realm nat_realm_name | protocol { icmp | icmpv6 | ip | ipv6 | other | tcp | udp } |
username user_name ] [ acsmgr instance instance_number ] [ verbose ] [ wide ] [ | { grep
grep_options | more } ]
nat-realm nat_realm_name | protocol { icmp | icmpv6 | ip | ipv6 | other | tcp | udp } |
username user_name ] [ acsmgr instance instance_number ] [ verbose ] [ wide ] [ | { grep
grep_options | more } ]
acsmgr instance instance_number
Specifies the ACS/Session Manager instance ID as an integer from 1 through 65535.
callid call_id
Specifies the call identification number as an 8-digit hexadecimal number.
domain-name domain_name
Specifies the domain name as an alphanumeric string of 1 through 127 characters.
nat-realm nat_realm_name
Specifies the NAT realm name as an alphanumeric string of 1 through 31 characters.
protocol { icmp | ip | other | tcp | udp }
Specifies the protocol:
icmp
: ICMPv4
icmpv6
ip
: IPv4
ipv6
other
: Protocols other than TCP, UDP, and ICMPv4/ICMPv6.
tcp
udp