Cisco Cisco Packet Data Gateway (PDG)

Exec Mode show Commands (H-L)

show ip bgp ▀

Command Line Interface Reference, StarOS Release 18 ▄

4675

show ip bgp

Displays Border Gateway Protocol (BGP) information for the current context.

Product

Privilege

Security Administrator, Administrator, Operator, Inspector

Mode

Exec

The following prompt is displayed in the Exec mode:

[local]host_name#

Syntax

show ip bgp [ ip_address/mask | debugging | filter-list list_name | neighbors [
ip_address ] | route-map map_name | vpnv4 [ all [ ip_address/mask | neighbors | summary ]
| route-distinguisher { ipv4_address | asn_value } rd_value | vrf vrf_name [
ip_address/mask | neighbors | summary ] | vpnv6 [ all [ ipv4_ddress | neighbors | summary
] | route-distinguisher { ipv4_address | asn_value } rd_value | vrf vrf-name [
ip_address/mask | neighbors | summary ] ] [ | { grep grep_options | more } ]

ip_address/mask

Specifies the IP address and netmask bits for the network for which information should be displayed. The IP
address and mask is the number of subnet bits, representing a subnet mask in CIDR notation. These must be
entered in the IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal CIDR notation.

debugging

Displays debug flags that are enabled.

filter-list

list_name

Displays routes that match the specified filter list.

neighbors [ip_address]

Displays information for all neighbors or a neighbor specified as an IP address in IPv4 dotted-decimal or
IPv6 colon-separated-hexadecimal notation.

route-map

map_name

Displays routes that match the specified route-map.

summary

Displays summary BGP information.