Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (H-L)
show ip prefix-list ▀
Command Line Interface Reference, StarOS Release 18 ▄
4689
show ip prefix-list
Displays IP prefix lists used to filter routes. With no keyword supplied, a list of all prefix lists and their entries is
displayed.
displayed.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ip prefix-list [ detail | name | summary ] list_name [ | { grep grep_options | more
]
]
detail
Displays detailed information for the named prefix list.
name
Displays information for the named prefix list.
summary
Displays summary information for the named prefix list.
list_name
Specifies the name of an existing prefix list as an alphanumeric string of 1 through 79 characters.
| { grep
grep_options
|
more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to display information about IP prefix lists.
Example
To display detailed information about a prefix list named
route_101
, enter the following command:
show ip prefix-list detail route_101