Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (H-L)
▀ show ipv6 ospf
▄ Command Line Interface Reference, StarOS Release 18
4708
show ipv6 ospf
Displays information regarding the configuration of the OSPFv3 Protocol on this system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ipv6 ospf [ database | debugging | interface | nieghbor | route | virtual-links ] [
verbose [ verbose ] [ | { grep grep_options | more } ]
verbose [ verbose ] [ | { grep grep_options | more } ]
show ipv6 ospf database [ adv-routeripv4-address ] [ ls-type { external | inter-prefix
| inter-router | intra-prefix | link | network | router }
| inter-router | intra-prefix | link | network | router }
show ipv6 ospf debugging
show ipv6 ospf interface
show ipv6 ospf neighbor [ details]
show ipv6 ospf route [ summary ]
show ipv6 ospf virtual-links
show ipv6 ospf database
Displays the OSPFv3 database including the following components.
adv-router
ipv4-address
: Displays OSPF database information from the advertising router
specified as an IP address in IPv4 dotted-decimal notation.
ls-type
: Displays the specified Link-State Advertisement (LSA) type, which can be one of the
following:
external
: Display External LSA information
inter-prefix
: Displays Inter Area Prefix LSA information
inter-router
: Displays Inter Area Router LSA information
intra-prefix
: Displays Intra Area Prefix LSA information
link
: Displays Link LSA information
network
: Displays Network LSA information