Cisco Cisco Packet Data Gateway (PDG)
GGSN Service Configuration Mode Commands
▀ trace-collection-entity
▄ Command Line Interface Reference, StarOS Release 18
5280
trace-collection-entity
This command configures the trace collection entity IP address. Trace collection entity is the destination node to which
trace files are transferred and stored.
trace files are transferred and stored.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
trace-collection-entity ipv4_addr
no trace-collection-entity
no
Removes the configured IPv4 address for trace collection in this GGSN service.
ipv4_addr
Specifies the IP address in IPv4 dotted-decimal notation.
Usage
Use this command to configure the trace collection entity IP address. This configuration is required because
during signaling session trace activation, CPC REQ and UPC REQ do not provide the IP address for the trace
collection entity.
during signaling session trace activation, CPC REQ and UPC REQ do not provide the IP address for the trace
collection entity.
Example
The following command configures the trace collection entity IP address with this GGSN service:
trace-collection-entity 192.36.56.56