Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (A-K)
cli ▀
Command Line Interface Reference, StarOS Release 18 ▄
5323
cli
Configures global Command Line Interface (CLI) parameters.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
cli { access { monitor-protocol | monitor-subscriber | show-configuration } {
administrator | operator } } | configuration-monitor | hidden | login-failure-delay
number | max-sessions number | operator clear-subscriber-one-only | test-commands
[encrypted] password password | trap config-mode }
administrator | operator } } | configuration-monitor | hidden | login-failure-delay
number | max-sessions number | operator clear-subscriber-one-only | test-commands
[encrypted] password password | trap config-mode }
no cli { configuration-monitor | hidden | login-failure-delay number | max-sessions |
operator clear-subscriber-one-only | trap config-mode }
operator clear-subscriber-one-only | trap config-mode }
default cli { access { monitor-protocol | monitor-subscriber | show-configuration } |
configuration-monitor | login-failure-delay | max-sessions | operator clear-subscriber-
one-only | trap config-mode }
configuration-monitor | login-failure-delay | max-sessions | operator clear-subscriber-
one-only | trap config-mode }
no
Removes the specified option.
default
Resets the keywords to their default values.
access { monitor-protocol | monitor-subscriber | show-configuration } { operator
| administrator }
| administrator }
Sets access privileges on the
monitor protocol
and
monitor subscriber
commands:
monitor-protocol
: Selects privileges for the
monitor protocol
command.
monitor-subscriber
: Selects privileges for the
monitor subscriber
command.
show-configuration
: Selects privileges for the
show-configuration
command. However the default
access level for this command is the user with operator privileges.
operator
: Sets the privileges for the selected command to allow use by users with operator privileges.
administrator
: Restricts use of the selected command to administrators only.
configuration-monitor
When this keyword is enabled, the system executes a
show configuration checksum
command every
15-minutes. The resulting checksum is compared with the previous checksum.