Cisco Cisco Packet Data Gateway (PDG)
HNB-RN PLMN Configuration Mode Commands
▀ rnc-id
▄ Command Line Interface Reference, StarOS Release 18
6532
rnc-id
Configures the Radio Network Concentrator (RNC) identifier in a Radio Network PLMN associated with HNB-GW
service. The RNC identifier is provided to the HNB during HNB-REGISTRATION.
service. The RNC identifier is provided to the HNB during HNB-REGISTRATION.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HNB-GW Service Configuration > HNB-RN PLMN
Configuration
Configuration
configure > context context_name > hnbgw-service service_name > radio-network-plmn mcc
mcc_number mnc mnc_number
mcc_number mnc mnc_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hnbgw-radio-plmn)#
Syntax
[ no ] rnc-id rnc_id
no
Deletes the RNC id from the system configuration.
rnc-id
Specifies the RNC identifier as an integer from 0 through 4095.
Usage
Use this command to configure RNC id for Radio Network PLMN which will be sent to HNBs from HNB-
GW during HNB-REGISTRATION procedure. Depending upon the requirement the RNC Identifier can be
provided at the desired granularity.
GW during HNB-REGISTRATION procedure. Depending upon the requirement the RNC Identifier can be
provided at the desired granularity.
Example
The following command configures the HNB-GW service to return an RNC identifier as
102
when an HNB-
REGISTRATION request is received:
global rnc-id 102