Cisco Cisco Packet Data Gateway (PDG)
ACS Rulebase Configuration Mode Commands
▀ edr nemo-call
▄ Command Line Interface Reference, StarOS Release 18
686
edr nemo-call
This command enables/disables the NEMO feature for populating the EDRs with source IP, destination IP and VRF
name of the NEMO Mobile Router (MR) host.
name of the NEMO Mobile Router (MR) host.
Important:
This CLI command is available only with NEMO license. Contact your Cisco account representative
for more information.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
[ default | no ] edr nemo-call
default
Configures this command with its default setting.
Default: Disabled
Default: Disabled
no
If previously configured, deletes the configuration from the current rulebase.
nemo-call
This keyword controls the feature of populating the EDRs with source IP, destination IP and VRF name
associated with UEs behind the NEMO MRs.
By default this keyword option will be disabled i.e. this CLI should be configured if the feature needs to be
turned ON.
associated with UEs behind the NEMO MRs.
By default this keyword option will be disabled i.e. this CLI should be configured if the feature needs to be
turned ON.
Usage
Use this command to enable this feature of creating the EDRs with the source IP, destination IP and VRF
name of the NEMO host.
name of the NEMO host.
Important:
This feature requires a valid license to be installed prior to configuring this feature. Contact your
Cisco account representative for more information.
Releases prior to 18.0, ECS did not see the inner user packet i.e. it sees only MIP packet containing user data
in both uplink and downlink direction. For example, it sees [IP header1][GRE header] [IP header2] [payload].
in both uplink and downlink direction. For example, it sees [IP header1][GRE header] [IP header2] [payload].