Cisco Cisco Packet Data Gateway (PDG)
LNS Service Configuration Mode Commands
avp map called-number apn ▀
Command Line Interface Reference, StarOS Release 18 ▄
6989
avp map called-number apn
This command maps an incoming Attribute Value Pair (AVP) to a GGSN Access Point Name (APN) for authentication
and authorization of the call.
and authorization of the call.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > LNS Service Configuration
configure > context context_name > lns-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-lns-service)#
Syntax
[ default | no ] avp map called-number apn
default
Disables mapping.
no
Disables mapping.
Usage
For LNS calls received through a LAC, the ICRQ message includes an APN name in the Called Number
AVP. This mapping function enables a GGSN system to provide RADIUS authentication/authorization via a
defined APN in place of an LNS configuration. If the mapped APN has not been defined within the GGSN
configuration then the call will be rejected.
AVP. This mapping function enables a GGSN system to provide RADIUS authentication/authorization via a
defined APN in place of an LNS configuration. If the mapped APN has not been defined within the GGSN
configuration then the call will be rejected.
Example
Enter the following command to enable mapping:
avp map called-number apn
Enter the following command to disable mapping:
no avp map called-number apn