Cisco Cisco Packet Data Gateway (PDG)

PDG Service Configuration Mode Commands

ip qos-dscp ▀

Command Line Interface Reference, StarOS Release 18 ▄

7907

ip qos-dscp

Configures the quality of service (QoS) differentiated service code point (DSCP) used when sending data packets over
the Wu interface in the downlink direction.

Product

PDG/TTG

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PDG Service Configuration

configure > context context_name > pdg-service service_name

Entering the above command sequence results in the following prompt:

[context_name]host_name(config-pdg-service)#

Syntax

ip qos-dscp { qci { 1 { dscp-pt } | 2 { dscp-pt } | 3 { dscp-pt } | 4 { dscp-pt } | 5 {
allocation-retention-priority 1..3 | dscp-pt } | 6 { allocation-retention-priority 1..3 |
dscp-pt } | 7 { allocation-retention-priority 1..3dscp | dscp-pt } | 8 { allocation-
retention-priority 1..3 | dscp-pt } | 9 { dscp-pt } + }

no ip qos-dscp { qci { 1 | 2 | 3 | 4 | 5 { allocation-retention-priority 1..3 | dscp-pt }
| 6 { allocation-retention-priority 1..3 | dscp-pt } | 7 { allocation-retention-priority
1..3 | dscp-pt } | 8 { allocation-retention-priority 1..3 | dscp-pt } | 9 {+

allocation-retention-priority

Specifies the DSCP for interactive class if the allocation priority is present in the QOS profile.

allocation-retention-priority

can be the integers 1, 2, or 3.

DSCP values use the following matrix to map based on traffic handling priority and Alloc/Retention priority
if the allocation priority is present in the QOS profile.
The following table shows the DSCP value matrix for

allocation-retention-priority

Table 40. Default DSCP Value Matrix

Allocation Priority 1

Allocation Priority 2

Allocation Priority 3

Traffic Handling Priority

af21