Cisco Cisco Packet Data Gateway (PDG)
RNC Configuration Mode Commands
ranap paging-area-id ▀
Command Line Interface Reference, StarOS Release 18 ▄
8275
ranap paging-area-id
This command configures the SGSN to use include the Paging Area ID IE in the Paging Request message.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > luPS Service Configuration > RNC Configuration
configure > context context_name > iups-service service_name > rnc id rnc_id
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service-rnc)#
Syntax
ranap paging-area-id paging-request [ network-sharing selected-plmn ]
[ default | no ] ranap paging-area-id paging-request [ network-sharing selected-plmn ]
default
Returns the configuration to the default setting and sends the common-plmn in the Paging Area ID IE.
no
Disables sending the Paging Area ID IE.
paging-request
Instructs the SGSN to send the Paging Area ID IE in the Paging Request message.
network-sharing selected-plmn
Instructs the SGSN to send the selected-plmn in the Paging Area ID IE if network sharing has been enabled.
Usage
Use this command to configure the SGSN to use ‘selected-plmn’ in the Paging Area ID IE in the Paging
Request message when network sharing is enabled.
Request message when network sharing is enabled.
Example
Use the following command to include the paging-area-id IE in a Paging Request with the common PLMN
when network sharing is enabled :
when network sharing is enabled :
default ranap paging-area-id paging-request
Use the following command to include global-cn-id IE in Paging Request with the selected-plmn (assumes
network sharing has been enabled):
network sharing has been enabled):
ranap global-cn-id paging-request network-sharing selected-plmn