Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
ipv6 initial-router-advt ▀
Command Line Interface Reference, StarOS Release 18 ▄
8877
ipv6 initial-router-advt
Creates an IPv6 initial router advertisement interval for the subscriber.
Product
PDSN
GGSN
ASN-GW
HSGW
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
ipv6 initial-router-advt { interval value | num-advts value | router-solicit-wait-timeout
value }
value }
default ipv6 initial-router-advt { interval | num-advts | router-solicit-wait-timeout }
no ipv6 initial-router-advt router-solicit-wait-timeout
default
Resets the command to its default settings.
no ipv6 initial-router-advt router-solicit-wait-timeout
Disables running timer to wait for router solicit and sends the initial router advertisement immediately once
session is up.
session is up.
ipv6 initial-router-advt
Enables an initial router advertisement interval in milliseconds.
interval
value
Default: 3000
The time interval the initial IPv6 router advertisement is sent to the mobile node in milliseconds.
The time interval the initial IPv6 router advertisement is sent to the mobile node in milliseconds.
value
is an integer between 100 and 16000 milliseconds.