Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
tunnel ipip ▀
Command Line Interface Reference, StarOS Release 18 ▄
8959
tunnel ipip
Configures IP-in-IP tunnelling parameters for the current subscriber.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
tunnel ipip peer-address peer_address local-address local_addr ]
no tunnel ipip
peer-address
peer_address
Specifies the IP address of the external gateway terminating the IP-in-IP tunnel.
local-address
local_addr
Specifies the IP address of the interface in the destination context originating the IP-in-IP tunnel.
no
Disables IP-in-IP tunneling for the current subscriber.
Usage
Subscriber IP payloads are encapsulated with IP-in-IP headers and tunneled by the GGSN or PDSN to an
external gateway.
external gateway.
Example
The following command configures the system to encapsulate subscriber traffic using IP-in-IP and tunnel it
from a local address of
from a local address of
192.168.1.100
to a gateway with an IP address of
192.168.1.225
:
tunnel ipip peer-address 192.168.1.225 local-address 192.168.1.100
preference 1
preference 1