Cisco Cisco ASR 5700
Context Configuration Mode Commands N-R
▀ radius server
▄ Command Line Interface Reference, StarOS Release 17
2726
admin-status { enable | disable }
Enables or disables the RADIUS authentication/accounting/charging server functionality, and saves the status
setting in the configuration file to re-establish the set status at reboot.
setting in the configuration file to re-establish the set status at reboot.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage
This command is used to configure the RADIUS authentication server(s) with which the system is to
communicate for authentication.
Up to 128 RADIUS servers can be configured per context. The servers can be configured as Accounting,
Authentication, charging servers, or any combination thereof.
communicate for authentication.
Up to 128 RADIUS servers can be configured per context. The servers can be configured as Accounting,
Authentication, charging servers, or any combination thereof.
Example
The following commands configure RADIUS server with the IP address set to 10.2.3.4, port to 1024, and
priority to 10:
priority to 10:
radius server 10.2.3.4 key sharedKey port 1024 max 127
radius server 10.2.3.4 encrypted key scrambledKey oldports priority 10