Cisco Cisco ASR 5700
Exec Mode Commands (D-S)
▀ save logs
▄ Command Line Interface Reference, StarOS Release 17
4154
[ ftp: | sftp: ] // [ username[ :password ] @ ] { host } [ : port# ] [
/directory ] / file_name
/directory ] / file_name
Important:
The USB ports and CDROM must be configured via the hypervisor to be accessible.
Important:
Do not use the following characters when entering a string for the field names below: “/” (forward
slash), “:” (colon) or “@” (at sign).
directory
is the directory name.
filename
is the actual file of interest.
username
is the user to be authenticated.
password
is the password to use for authentication.
host
is the IP address or host name of the server.
Important:
hostname
can only be used if the
networkconfig
parameter is configured for DHCP and the
DHCP server returns a valid nameserver.
port#
is the logical port number that the communication protocol is to use.
active
Saves data from active logs.
inactive
Saves data from inactive logs.
callid call_id
Specifies a call ID for which log information is to be saved as a 4-byte hexadecimal number.
event-verbosity evt_verboseness
Specifies the level of verboseness to use in displaying of event data as one of:
min
: Logs minimal information about the event. Information includes event name, facility, event ID,
severity level, date, and time.
concise
: Logs detailed information about the event, but does not provide the event source within the
system.
full
: Logs detailed information about event, including source information, identifying where within
the system the event was generated.
facility facility
Specifies the facility to modify the filtering of logged information. Valid facilities for this command are:
a10: A10 interface facility
a11: A11 interface facility
a11mgr: A11 Manager facility
aaa-client: Authentication, Authorization and Accounting (AAA) client facility