Cisco Cisco ASR 5700
Global Configuration Mode Commands (threshold poll commands A - N)
▀ threshold poll cdr-file-space interval
▄ Command Line Interface Reference, StarOS Release 17
5744
threshold poll cdr-file-space interval
Configures the polling interval for Charging Data Record (CDR) File Space Usage threshold.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold poll cdr-file-space interval duration
default threshold poll cdr-file-space interval
default
Uses the default polling interval.
Default: 300 seconds
Default: 300 seconds
interval duration
Specifies the polling interval (in seconds) for the CDR File Space Usage threshold.
duration
must be an integer from 60 through 60000.
Usage
This command configures the polling interval for CDR File Space Usage threshold.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a
polling interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
threshold monitoring
and other threshold commands for additional information on the
system’s support for thresholds in this chapter.
Important:
To enable an SNMP trap for monitoring this threshold use the
snmp trap enable
ThreshCDRFileSpace
command in this mode.
Example
The following command configures the polling interval to
600
seconds for the CDR file space usage
threshold:
threshold poll cdr-file-space interval 600